Skip to main content
Download PDF

Correction to: Biomechanical properties of 3D-printed bone scaffolds are improved by treatment with CRFP

Journal of Orthopaedic Surgery and Research volume 13, Article number: 37 (2018) Cite this article

The Original Article was published on 22 December 2017

Correction to: J Orthop Surg Res (2017) 12: 195. https://doi.org/10.1186/s13018-017-0700-2

In the original publication of this article [1] there was an error in one of the author names. In this publication the correct and incorrect name are indicated.

Originally the author name has been published as:

• John P. Pfail

The correct name is as followed:

• John L. Pfail

The original publication has been corrected.

Reference

  1. Helguero CG, Mustahsan VM, Parmar S, et al. Biomechanical properties of 3D-printed bone scaffolds are improved by treatment with CRFP. J Orthop Surg Res. 2017;12:195. https://doi.org/10.1186/s13018-017-0700-2

    Article  PubMed  PubMed Central  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, Stony Brook University, Stony Brook, NY, USA

    Carlos G. Helguero, Vamiq M. Mustahsan & Imin Kao

  2. Department of Orthopedics, Stony Brook Medical Center, Stony Brook, NY, USA

    David E. Komatsu

  3. Department of Anesthesiology, Stony Brook Medical Center, Stony Brook, NY, USA

    Sunjit Parmar, Sahana Pentyala, John L. Pfail & Srinivas Pentyala

  4. Facultad de Ingeniería en Mecánica y Ciencias de la Producción, Escuela Superior Politécnica del Litoral, ESPOL, Guayaquil, Ecuador

    Carlos G. Helguero

Authors
  1. Carlos G. Helguero
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Vamiq M. Mustahsan
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Sunjit Parmar
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Sahana Pentyala
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. John L. Pfail
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Imin Kao
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. David E. Komatsu
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Srinivas Pentyala
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Srinivas Pentyala.

Additional information

The original article can be found online at https://doi.org/10.1186/s13018-017-0700-2.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Helguero, C.G., Mustahsan, V.M., Parmar, S. et al. Correction to: Biomechanical properties of 3D-printed bone scaffolds are improved by treatment with CRFP. J Orthop Surg Res 13, 37 (2018). https://doi.org/10.1186/s13018-018-0741-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s13018-018-0741-1

Journal of Orthopaedic Surgery and Research

ISSN: 1749-799X