Skip to main content
Fig. 2 | Journal of Orthopaedic Surgery and Research

Fig. 2

From: Baseplate inferior offset affects shoulder range of motion in reverse shoulder arthroplasty in Asian population

Fig. 2

Installation of the baseplate component in the simulation. A The bottom of the baseplate and lower surface of the scapula were aligned and determined to have an inferior offset of 0 mm. B The baseplate was shifted downward in 1 mm increments from 0 to 5 mm. This figure shows the positioning at 5 mm. C The baseplate was tilted inferiorly from 0° to 15° in increments of 5°. This figure shows the title at 15°

Back to article page

Journal of Orthopaedic Surgery and Research

ISSN: 1749-799X