Skip to main content
Fig. 3 | Journal of Orthopaedic Surgery and Research

Fig. 3

From: Changes in hip joint contact stress during a gait cycle based on the individualized modeling method of “gait-musculoskeletal system-finite element”

Fig. 3

The musculoskeletal model and the FE model in the phase 2 of a gait cycle. A, B A subject-specific gait simulation using the kinematic analysis and inverse dynamic analysis; C the hip joint in an FE model (the yellow point is the center of the femoral head and also the reference point); D, E FE model (the yellow coordinate system has been registered and consistent with the femoral coordinate system in the AnyBody system); F cartilage model

Back to article page

Journal of Orthopaedic Surgery and Research

ISSN: 1749-799X