Table 1 The numerical results of the entire experiments. In the table, the following codes are used. S1: speed of 500 rpm; S2: speed of 1000 rpm; S3: speed of 1500 rpm; F1: feed-rate of 35 mm/min; F2: feed-rate of 65 mm/min; F3: feed-rate of 85 mm/min. Therefore, for example, S1-F2 means drilling with speed of 500 rpm and feed-rate of 65 mm/min
From: Appraising efficiency of OpSite as coolant in drilling of bone
Drilling diameter | Coolant type | Drilling speed and feed-rate | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
S1-F1 | S1-F2 | S1-F3 | S2-F1 | S2-F2 | S2-F3 | S3-F1 | S3-F2 | S3-F3 | ||
Maximum temperature of experiment (°C) | ||||||||||
2.7 mm | None | 36.0 ± 3 | 36.0 ± 2 | 39.0 ± 2 | 28.9 ± 2 | 39.0 ± 3 | 74.0 ± 1 | 53.0 ± 2 | 35.2 ± 3 | 62.0 ± 1 |
Saline | 35.7 ± 2 | 32.0 ± 1 | 36.0 ± 3 | 28.0 ± 1 | 27.0 ± 4 | 44.8 ± 2 | 33.0 ± 3 | 29.0 ± 2 | 30.0 ± 1 | |
OpSite | 27.0 ± 2 | 25.1 ± 3 | 33.0 ± 2 | 25.1 ± 2 | 25.0 ± 3 | 35.2 ± 1 | 22.0 ± 2 | 22.0 ± 3 | 21.4 ± 1 | |
3.5 mm | None | 36.0 ± 2 | 36.0 ± 3 | 38.0 ± 1 | 45.7 ± 2 | 43.7 ± 2 | 65.5 ± 1 | 66.0 ± 1 | 42.3 ± 3 | 41.0 ± 3 |
Saline | 26.0 ± 1 | 34.7 ± 2 | 27.9 ±1 | 37.2 ± 2 | 38.9 ± 1 | 31.0 ± 2 | 49.7 ± 3 | 36.2 ± 1 | 38.4 ± 3 | |
OpSite | 24.0 ± 2 | 30.0 ± 1 | 25.7 ±3 | 34.0 ± 2 | 37.0 ± 3 | 29.1 ± 2 | 31.6 ± 3 | 30.0 ± 1 | 26.5 ± 2 | |