Asymmetry and structural system analysis of the proximal femur meta-epiphysis: osteoarticular anatomical pathology

Background The human femur is commonly considered as a subsystem of the locomotor apparatus with four conspicuous levels of organization. This phenomenon is the result of the evolution of the locomotor apparatus, which encompasses both constitutional and individual variability. The work therein reported, therefore, underlies the significance of observing anatomical system analysis of the proximal femur meta-epiphysis in normal conditions, according to the anatomic positioning with respect to the right or left side of the body, and the presence of system asymmetry in the meta-epiphysis structure, thus indicating structural and functional asymmetry. Methods A total of 160 femur bones of both sexes were compiled and a morphological study of 15 linear and angulated parameters of proximal femur epiphysis was produced, thus defining the linear/angulated size of tubular bones. The parameters were divided into linear and angulated groups, while maintaining the motion of the hip joint and transmission of stress to the unwanted parts of the limb. Furthermore, the straight and vertical diameters of the femoral head and the length of the femoral neck were also studied. The angle between the neck and diaphysis, the neck antiversion and angle of rotation of the femoral neck were subsequently measured. Finally, the condylo-diaphyseal angle with respect to the axis of extremity was determined. To visualize the force of intersystem ties, we have used the method of correlation galaxy construction. Results The absolute numeral values of each linear parameter were transformed to relative values. The values of superfluity coefficient for each parameter in the right and left femoral bone groups were estimated and Pearson's correlation coefficient has been calculated (> 0.60). Retrospectively, the observed results have confirmed the presence of functional asymmetry in the proximal femur meta-epiphysis. On the basis of compliance or insignificant difference in the confidence interval of the linear parameters, we have revealed, therefore, a discrepancy in values between the neck and the diaphysis angle and the angle of femoral neck rotation (range displacement of confident interval to a greater degree to the right). Conclusion This study assessed the observations of a systemic anatomical study encompassing the proximal femur meta-epiphysis behavior in normal condition. This work has significance in medical practice as the theoretical basis is also required in knowing the decreased frequency and degree of severity of osteoarthritic pathologies in the dominant lower extremity.


Background
The femur, or as is commonly known as the thighbone, is one of the most thoroughly anatomically studied human body bones [1]. There is consensus as to the femur's anatomical peculiarities, age, gender and locomotion physiology [2]. Nevertheless, there is yet mounting controversy regarding the values of the linear and angular parameters of the proximal meta-epiphysis and their correlations.
The degree of the diaphysio-femoral neck angle according to Wagner and colleagues [3] varies from 125°3' to 132°3'. On the other hand, it was reported that the value may fluctuate from 109° to 153° [4], with no gender or racial predilection [5,6].
The antiversion angle range is approximately 74° (this value is conspicuously variable -it can vary from -12 to +74) [1]. Anatomically, it is well known that each skeletal bone is under certain influence of static and dynamic stress. This, in turn, defines the external shape and internal morphology of the femur's bone structure [7][8][9][10][11]. Nevertheless, the peculiarities of the femur and its epiphysis with regards to bilateral asymmetry (right or left side of the body) are not well understood [1,6].
We have previously reported the systematic organization of the femur [1], with subdivided groups into four levels of organization and anatomical values correlating with that of the human body joints. As the anatomy of the human body is characterized by the functional predominance of the right upper and left lower limbs [1,[12][13][14], particular actuality was acquired in studying the value of parameters at different levels involved with forming the functional asymmetry of the femur bone [6].
The purpose of this work was to assess the observations of a systemic anatomical study encompassing the proximal femur meta-epiphysis behavior in normal condition. Our study has a spontaneous significance in medical practice as the theoretical basis is also required in unraveling the decreased frequency and degree of severity of osteoarthritic pathologies in the dominant lower extremity, in accordance with recurrent experimental observations [15][16][17][18][19][20].

Sample collection and compilation
A total of one hundred and sixty (160) femur bones of both genders were compiled from a collection of human anatomy museums at the departments of several institutions, as previously indicated [1], without any indications of pathologic signs or symptoms or otherwise.
Furthermore, a morphological study of fifteen (15) linear and angulated parameters of proximal femur epiphysis was produced with the help of special arrangements [1], which allowed us to define the linear and angulated size of the tubular bones.

Sample anatomical analysis
Depending on the degree of participation in function, all the investigated parameters of the proximal femur metaepiphysis were divided into linear and angulated groups, while maintaining the motion of the hip joint and transmission of stress to the unwanted parts of the limb.
Among the linear values that support the hip joint motion, we studied the straight and vertical diameters of the femoral head and the length of the femoral neck anteriorly, posteriorly, superiorly and inferiorly.
For the angulated values, we measured the angle between the neck and the diaphysis, the neck antiversion (rotation of the femoral neck in sagital plane), and angle of rotation of the femoral neck (in frontal plane). For the unwanted parts where the transmission of body weight occurs, we contributed the linear values as transverse size of the proximal epiphysis, and the vertical and straight neck diameters, intertrochanteric space, as straight and transverse diameter of diaphysis. Moreover, for the angulated values, we related the condylo-diaphyseal angle or angle of deviation of the femur with respect to the axis of extremity.
It is also noted that different ratios between various correlations with the value of ≥ 0.8 and < 0.7 at both groups (left and right bones) essentially indicate that the group of left bones is more specialized and thus functionally less universal.

Statistical analysis
Results were assessed using the analysis software of Microsoft Excel XP and the method of correlation between systems and structures. In each group, the value of Pearson's correlation coefficient has been calculated among the studied parameters.
For the following analysis, correlation links have been taken into consideration with the correlation coefficient more than 0.6, as shown in Figure 1.
It's worth noting that all values were normalized (the procedure of dividing of the mean of each linear parameter by the mean of the transverse diameter of the femoral diaphysis). Therefore, the deviation of the measurement becomes irrelevant.
Furthermore, the value of the transverse diameter of the femoral diaphysis was used because this segment of the bone is specified for support (mono-functional).
To visualize the force of intersystem ties, we have used the method of correlation galaxy construction [1] (see Figure  1).
In accordance, each measurement (using our device and caliper) was produced four (4) times by one researcher and then the average values on each investigated linear or angular parameter were used for the following analysis procedures. As is well known, the repeatability of the measurement can be described and characterized directly or indirectly by several parameters, such as the standard deviation and dispersion. In our case, the repeatability of the measurement was dependent on two parameters: i) accuracy of the experimenter and ii) 'device mistake.' Thus, one researcher and one device plus the following normalization process using the value of the transverse size of the femoral shaft (measures by a given experimenter and one caliper with the same accuracy and 'device mistake') indicate specific repeatability of a certain measurement. For example, the following relation indicates a specific degree of accuracy: X (true value of any linear parameter) + x (current mistake of measurement)/D (true value of the transverse size of the femoral shaft) + d (current mistake of measurement) = A (normalized value of the measures linear parameter)

Results
The absolute numerical values of each linear parameter were transformed to relative values (i.e., for each bone, the transverse diameter of diaphysis was considered a unit of measure), as shown in Table 1 (see Statistical analysis above). These parameters represent the absolute values of the intervals relating to the right and left femoral proximal meta-epiphysis bones, indicating proximity and specifi-Correlation galaxies revealed during the structure analysis of the femur proximal meta-epiphysis (A, to the right; B, to the left; C, to the right; D, to the left) Furthermore, we have estimated the values of superfluity coefficient for each parameter in the right and left femoral bone groups, separately (the value of system information capacity). The results of the informational analysis are given in Table 2. The superfluity coefficient values of the researched hip arthrosis proximal meta-epiphysis parameters also indicate proximity and specificity.
Furthermore, correlation analysis was undertaken. The values of Pearson's correlation coefficient among parameters of femoral bones proximal epiphysis are shown in Table 3. These correlation values among the aforementioned parameters of the femoral bones proximal epiphy-sis represent a correlating pattern characteristic of the right and left bones, diametrically and longitudinally.
In each of the abovementioned analysis approaches, all absolute values were transformed to the relative type. This procedure, therefore, normalizes all values accordingly.

Discussion
Retrospective review of the observed results confirms the presence of functional asymmetry in the proximal femur meta-epiphysis [1]. On the basis of compliance or insignificant difference in the confidence interval of the linear parameters, we have revealed a discrepancy in values between the neck and the diaphysis angle and the angle of femoral neck rotation (range displacement of confident interval to a greater degree to the right).  This fact can be explained by the obvious muscular imbalance and predominance of the right extremity in providing support function [18][19][20][21][22][23][24]. In the analysis of correlation dependence, we have not revealed any significant ties among angular and linear parameters. In our opinion, it indicates that their influence on the morphological and functional characteristics of the proximal femur meta-epiphysis is, in general, minimal and their absolute values characterize individual variability in the borders of the backbone (noted above) characteristics at the previous level [5][6][7][8][9].
Furthermore, we have revealed analytical correlation dependence (bonding force is more than 0.8) between the diameters of the femoral head and neck in both left and right bones groups (parameters are marked as A, B, C and D; Figure 1), which shows active participation of these structures in realizing the support function of the hip joint [1][2][3][4][5]. Besides, the given structures can be considered as backbones (system-organizing) [25][26][27]. The presence of correlation between the transverse size of the proximal epiphysis (J) and the diameter of the femoral head may indicate the predominance of the left extremity in provid-ing movements in the hip joint and also the maintenance of the vertical position of body while walking [12][13][14][15].
Of particular significance, the results of the aforementioned informational analysis show that the femur proximal meta-epiphysis is asymmetric. Moreover, left proximal epiphysis has a greater margin of safety according to a number of parameters transmitting load to underlying leg part (vertical head and neck diameters, intertrochanteric space) and providing direct walking of a person (diaphyseal neck angle, neck anteversion and rotation angles) [2][3][4][5][6][7]16,27].
In addition to that, the results of the informational analysis and correlation ties of moderate intensity (Pearson's correlation coefficient 0.6-0.79) in both groups between the intertrochanteric space and the parameters of the femoral head confirm the hypothesis that the proximal parts of the femur act at a level that transmits load to the knee joint [28][29][30][31].
The centre of the femoral head is the place of strength application that leads to the development of significant flexion; its value can be defined as the distance between linear action of strength and axis of the center of bone gravity [25][26][27][28][29][30][31]. Moreover, there are three types of tension in bones: flexion, compression and rotation [32]. An additional bone compression occurs on the side of strength action, whereas a stress sprain develops on the opposite side.
Transmission of the axial load to the hip joint region occurs in different positions -it can be adducted and abducted in many directions (anterior, posterior, etc.) [32]. Furthermore, stress on the diaphysis is transmitted through the head by means of neck. Biomechanical stress axis may also form an angle with the anatomical axis [1].
In case of maximal femur adduction there will be more eccentricity, where in the subtrochanteric area more flexion is seen [27][28][29][30][31][32]. On the left, correlation ties between the intertrochanteric space and the transverse size of the proximal epiphysis (marked as E and J) confirm this hypothesis and show a greater degree of fulfillment of the support and moving function of the left leg.
On the basis of the aforementioned analysis, we can formulate the conclusion that there is a system asymmetry of the proximal femur in normal condition with the predominance of the left proximal epiphysis in providing moving and support function. The right proximal femur meta-epiphysis is less adjusted to movement and severe strain. This indicates the prevalence of degree and frequency of the right hip joint impairment [33][34][35][36].
In accordance with the aforementioned, it can be concluded that the less the number of correlating values amongst 'right-side' parameter means, the more the right femur is functionally 'universal,' less 'structural'. This thereby exhibits the realization of more functions as compared with the left bone [1].