Skip to main content
Fig. 1 | Journal of Orthopaedic Surgery and Research

Fig. 1

From: Three-dimensional kinematic change of hindfoot during full weightbearing in standing: an analysis using upright computed tomography and 3D-3D surface registration

Fig. 1

320-row upright computed tomography (CT) scanner. a The CT images were acquired from the distal femur to the entire foot using a 320-row upright CT scanner (prototype TSX-401R; Canon Medical Systems, Otawara, Japan). The condition of each weightbearing stance was measured using a pressure mat (BIG-MAT; NITTA Corporation, Osaka, Japan) and pressure calculation system (FootMat; Tekscan, South Boston, MA, USA). b The image qualities of the upright CT scanner are good to excellent

Back to article page

Journal of Orthopaedic Surgery and Research

ISSN: 1749-799X