Skip to main content
Figure 2 | Journal of Orthopaedic Surgery and Research

Figure 2

From: A biomechanical assessment of modular and monoblock revision hip implants using FE analysis and strain gage measurements

Figure 2

CAD models for hip implants alone (Construct A). (a) Modular and (b) Monoblock devices were each placed in rigid blocks distally and then proximally subjected to 700 and 2000 N axial loads using a flat plate during FE analysis. The same flat plate was used in applying load in FE analysis for the hip implant-femur (Construct B). Large arrows show vertical load direction.

Back to article page

Journal of Orthopaedic Surgery and Research

ISSN: 1749-799X